This discussion is archived
1 Reply Latest reply: Oct 21, 2010 7:36 PM by abe2020 RSS

Program your SCP-3200 by Sanyo

SOFTMETRIA Newbie
Currently Being Moderated

WRONG INSTRUCTIONS!!

 

 

instead the last #. press the key OK. So, ##000000 OK

  • 1. Re: Program your SCP-3200 by Sanyo
    abe2020 Sprint Employee
    Currently Being Moderated

     

    1. Press ## followed by the 6-digit Master Subsidy Lock (MSL) code, followed by an additional #.
    2. Example: ##123456#.
      • The last # entered will not show on the display.
    • The Service Program screen will be displayed, highlighted on View.
    • Important Notes:
      • Handle the MSL with extreme caution.
      • When it must be shared with the customer, refer to it as a six-digit number instead of MSL.
    1. Scroll down to Edit.
    2. Press Menu/OK.
      • Enter MDN screen will be displayed.
    3. Enter the 10-digit MDN.
    1. Press Menu/OK.
    2. Enter MSID screen will be displayed.
      • Note: Entering the numbers will clear out any numbers that are currently in the phone.
      1. Enter the 10-digit MSID.

        • Do not enter the five 0’s preceding the MSID displayed in CSM.
      2. Press Menu/OK.

        • This will take you back to the original Service Program screen.
      3. Scroll down to Done.
      4. Press Menu/OK.
        • The phone will turn off and turn back on and voice programming is complete

    More Like This

    • Retrieving data ...