Please follow this instructions:-
1. Put the headset in pairing mode
• When you turn on your Jabra BT2070 for the first time, the
headset will automatically start up in pairing mode – i.e. it is
discoverable for your phone. When the headset is in pairing
mode the LED is constantly lit.
2. Set your Bluetooth phone to ‘discover’ the Jabra BT2070
• Follow your phone’s instruction guide. First make sure that
Bluetooth is activated on your mobile phone. Then set your
phone to discover the headset. This usually involves going
to a ‘setup,’ ‘connect’ or ‘Bluetooth’ menu on your phone and
selecting the option to ‘discover’ or ‘add’ a Bluetooth device.*
3. Your phone will find the Jabra BT2070
Your phone will find the headset under name “Jabra BT2070”.
Your phone then asks if you want to pair with the headset.
Accept by pressing ‘Yes’ or ‘OK’ on the phone and confirm with
the passkey or PIN = 0000 (4 zeros). Your phone will confirm
when pairing is complete.
In case of unsuccessful pairing, put the Jabra BT 2070 into pairing
mode manually. Make sure the headset is off. Press and hold the
on/off button for approximately 5 seconds until the LED has a
constant light.The LED will flash before the light is constant –
keep holding down the button until light is constant.
Check out a fun infographic that teaches you how to increase storage, enhance security, improve battery life and clean your device.