cancel
Showing results for 
Search instead for 
Did you mean: 

10/25 - HTC EVO 3D Software Update - 2.08.651.3

Wizard

10/25 - HTC EVO 3D Software Update - 2.08.651.3

HTC EVO 3D Software Update - 2.08.651.3

Enhancements/Fixes

- Security Update

Important Notes:

- The new software version is: 2.08.651.3. 

- The customer may initiate the update beginning 10/25 or wait until notifications begin being sent to devices on 10/27.

-  Refer to the HTC EVO 3D Software Updates blog for install instructions. 

- Updates may be released in stages. When checking for the update, you may receive a message that no update is available,   

  check back later or wait until the update notification is sent to your device.  

21 REPLIES
Journeyman

10/25 - HTC EVO 3D Software Update - 2.08.651.3

Well since I dont see any negative replys I will try it.

Journeyman

10/25 - HTC EVO 3D Software Update - 2.08.651.3

did it, so far so good

Journeyman

10/25 - HTC EVO 3D Software Update - 2.08.651.3

Are there more explicit explanations of what's in the update? I'd like to know if this is something I should do right away out of fear for security matters, or something I can be a lazy bum about.

10/25 - HTC EVO 3D Software Update - 2.08.651.3

This fixes the HTCLoggers security vulnerability. A quick Google search should provide plenty of information about the vulnerability. I would recommend doing the update as soon as it is available for your device.

Journeyman

10/25 - HTC EVO 3D Software Update - 2.08.651.3

halcyoncmdr123 wrote:

This fixes the HTCLoggers security vulnerability. A quick Google search should provide plenty of information about the vulnerability. I would recommend doing the update as soon as it is available for your device.

Thanks so much for the info.

For anyone too lazy to hit Google themselves, here's a link:

http://www.androidpolice.com/2011/10/01/massive-security-vulnerability-in-htc-android-devices-evo-3d...

Scary stuff. Installing update NOW.

Journeyman

10/25 - HTC EVO 3D Software Update - 2.08.651.3

Since updating I can't try to upgrade my firmware, PRL or pri. I get error code 1012???? I never had this problem before this upgrade

Wizard

Re: 10/25 - HTC EVO 3D Software Update - 2.08.651.3

Error code 1012 most commonly indicates one of the following situations:


  • Incomplete or incorrect programming of the device.
  • Incomplete or erred provisioning following activation, ESN swap, or change to the Sprint Vision username or password.
  • The network is busy or experiencing a problem.

To troubleshoot Error code 1012, perform the following steps:

NOTE:  While troubleshooting, if your attempt to log in to Sprint Vision  services fails, wait 20 to 30 minutes before trying again. Three failed  login attempts within a 20-minute period locks your account for 20  minutes. Attempting to log in to a locked account resets the timer on  the lock.

  1. Make sure you are in a Sprint coverage area and the phone has two or more bars of signal.
  2. Attempt a phone call. NOTE: If you cannot complete a call, the phone will not provision data services and you will need to contact us.
  3. If the phone was recently activated, wait four hours, and then attempt to log in to Sprint Vision again.
  4. With  the phone on, remove the battery from the phone for one to two minutes.  Reinsert the battery, and then attempt to log in to Sprint Vision  again.
  5. Update your Sprint Vision profile, and then attempt to log in to Sprint Vision again.
  6. If the previous troubleshooting steps did not resolve the issue, contact us for further assistance with this error.

NOTE:  It is important that you call from either a home phone or another phone  and request data support. Explain your issue and what troubleshooting  steps you have performed. They will assist you with programming your  phone. Actions that might be taken by a support representative include  re-provisioning or fully resetting your phone, which erases everything  on the phone. Be sure to back up your important information prior to  contacting support.

Journeyman

10/25 - HTC EVO 3D Software Update - 2.08.651.3

Journeyman

10/25 - HTC EVO 3D Software Update - 2.08.651.3

Since installing the update yesterday, my camera no longer works. However, prior to installing the software update, I updated my Profile and PRL. Not sure which one is directly related to the camera not working. When I open the camera itself, no image appears (blank/black screen), the camera menu options are not accessible, and the back button does not work to exit. I have to press the 'home' key to leave the blank screen. When trying to access the camera from a third party app, it causes the app to force close.