On the home page, enter the Administrator Password (default is password), and click OK
Go to Advanced Settings > Device tab > Basic sub-tab
Click Check for Updates Now button; Note: You MUST be plugged into AC power to perform an update
Select Update Options
Select Download and Install Now
A progress bar on your computer will show the update progress. Note: This process will take approximately 10 to 20 minutes, depending on your signal quality
Once the package is downloaded, your Overdrive will apply the new version and web page will show Software Update in Progress. The Overdrive device display will show Update in progress and a percentage complete with a status bar.
Once the update is applied, your Overdrive should reboot and again connect to the network. If it does not reboot on its own, you may have to turn the power off and back on again manually.
To update from a file:
Ensure your Overdrive is connected to the AC charger or computer through the USB to Micro B cable
Go to the Overview download page and Download the latest firmware file to your computer Note: We recommend downloading it to your desktop to make it easy to find