cancel
Showing results for 
Search instead for 
Did you mean: 

Program your SCP-3200 by Sanyo

Highlighted
Journeyman

Program your SCP-3200 by Sanyo

WRONG INSTRUCTIONS!!

instead the last #. press the key OK. So, ##000000 OK

1 REPLY
Master

Re: Program your SCP-3200 by Sanyo

  1. Press ## followed by the 6-digit Master Subsidy Lock (MSL) code, followed by an additional #.
  2. Example: ##123456#.
    • The last # entered will not show on the display.
  • The Service Program screen will be displayed, highlighted on View.
  • Important Notes:
    • Handle the MSL with extreme caution.
    • When it must be shared with the customer, refer to it as a six-digit number instead of MSL.
  1. Scroll down to Edit.
  2. Press Menu/OK.
    • Enter MDN screen will be displayed.
  3. Enter the 10-digit MDN.
  1. Press Menu/OK.
  2. Enter MSID screen will be displayed.
    • Note: Entering the numbers will clear out any numbers that are currently in the phone.
    1. Enter the 10-digit MSID.

      • Do not enter the five 0’s preceding the MSID displayed in CSM.
    2. Press Menu/OK.

      • This will take you back to the original Service Program screen.
    3. Scroll down to Done.
    4. Press Menu/OK.
      • The phone will turn off and turn back on and voice programming is complete
    Community News

    Community News

    Find out whats happening on the bridge, we'll share new features and fun on the community as well as exciting news from the mothership...read more.